Page 1 of 6

Grish`s WIPs

Posted: 12 Apr 2012, o 10:30
by Grish
Hi!
This topic is for you, to comment and criticize my WIPs. First, Ogre Slaughterer from Scibor Monstrous Miniatures:
Image

I want him to have a human-like skin, not green/olive, like GW sometimes paint their ogres. I plan to wash folds with dark brown oil color from Abtailung 502+turpentine.There is first my question: how to protect resin miniature (and base skin color), to avoid nasty suprises about melting miniature or washing away base color?

Re: Grish`s WIPs - Ogre Slaughterer

Posted: 12 Apr 2012, o 10:37
by Hellspawn
Protect from what?

Re: Grish`s WIPs - Ogre Slaughterer

Posted: 12 Apr 2012, o 10:38
by Pandadosmares
Grish wrote:how to protect resin miniature (and base skin color), to avoid nasty suprises about melting miniature or washing away base color?
What are you going to use on the mini? acid? oil wont melt the mini has for turpentine just be carefull you wont need much just a wet brush ;)

Re: Grish`s WIPs - Ogre Slaughterer

Posted: 12 Apr 2012, o 10:42
by Grish
Well, some time ago I was washing my Flame of War tanks with this oil paint+turpentine and it wash away some base color paint. Maybe too much turpentine :)

Re: Grish`s WIPs - Ogre Slaughterer

Posted: 12 Apr 2012, o 10:46
by Pandadosmares
Yup, you just need enough to blend the oils just wet the brush and even so its too much

Re: Grish`s WIPs - Ogre Slaughterer

Posted: 12 Apr 2012, o 11:00
by Grish
Ok, so one small 'dot' oil paint from the tube and few drops of turpentine will do?

Re: Grish`s WIPs - Ogre Slaughterer

Posted: 12 Apr 2012, o 11:10
by Pandadosmares
I dont know how you are using the oils, and im not the best one to say this, since rarelly i use them and second i use water based oils :D ( i know its crazy) so here it goes.
1st you dilute the oils with turpentine
2nd with a clean brush with just the turpentine you blend the oils thats one thing thats good with oils

Re: Grish`s WIPs - Ogre Slaughterer

Posted: 12 Apr 2012, o 13:19
by Grish
Thanks, I`ll try to wash it this way :)

Re: Grish`s WIPs - Ogre Slaughterer

Posted: 17 Apr 2012, o 09:48
by Grish
Ok, I decide not to use oils on his skin because of many hollows. So I tried to use airbrush with my own compositions of colors and proportions of its drops shown below. I added 3 drops of Tamiya thinner as well. I was trying to make this mix similar to GW color Tallarn Flesh.
Image

The base color was quite satisfying, so I added 1 drop of Deck Tan and spray Ogre again, this time just from above. Then I wash with Ogre Flesh only main hollows, wait it to dry, and spray again with another extra drop of Deck Tan. Again, wash and spray with extra drop Deck Tan. The result you can see below.
Image
Image
Image
Image
Image
Image
Image
Image

Re: Grish`s WIPs - Ogre Slaughterer

Posted: 19 Apr 2012, o 15:38
by Grish
Here is a little update. The picture is poor, I know ;)But maybe someone will like and/or comment :)
Image
Image
Image
Image
Image