Making display base for a dozen or so miniatures

Hello after long break!

I didn’t plan this long delay but life has proved me during few passed months it can mess with anyone when it’s least expected.

Besides – and much more important actually – I am constantly branching out so my hobby time was replaced with browsing real estate papers – hope it’ll be worthy all the time and effort…

Who needs a display base?

Anyway – even though there’s much less time for painting I just couldn’t refuse myself playing a skirmish game once per a week or two and recently we’ve been working hard converting old Necromunda rules to make the game more exciting.


Photo: How To Make Display Base - Tutorial

That leads to the definitely biggest hobby of achievement of last months which was finishing whole gang of Goliaths – based on EM4 minis. I like these bastardos so much I decided to give them display base so they look nice standing in my display case, waiting for next battle. It takes less than a day to finish base like I made and that’s what the article is about.
Please note – Chest of Colors is very friendly community so the original text had to be slightly adjusted to be nice as well but if you want to read FUUK-friendly version – just visit my blog at Plinth Country.

What will you need?

Apart from ordinary hobby supplies try to get some plaster (or any other filler: the cheaper – the better), photo frame or display plinth of some
sort and if you plan to take some wip-photos – wife, girlfriend or brother will be useful as well.

So I started by choosing photoframe – it’s pretty cheap, you can buy it in store like IKEA and it’s perfect for the job. First or all I removed glass – you can throw it away. I was also trying to mark spots for base sockets which turned out totally useless bit later.


Photo: How To Make Display Base - Tutorial

First of all I broke wooden frame support off the frame back.


Photo: How To Make Display Base - Tutorial

Another step was cutting the styrofoam sheet to fit the frame – wallpaper knife used. To get more precise cut I used hot wire thingy. I inserted the sheet into photoframe – as you can see it fits pretty well so we can proceed.


Photo: How To Make Display Base - Tutorial

The bottom was glued to the frame. I used solid amount of polymer glue to be sure it won’t fall off or whatever. If you don’t trust the glue only – hit the base with some paperclip pins.


Photo: How To Make Display Base - Tutorial

Creating the terrain

For better minis presentation I decided to add small elevation in the back of the display area. I plan to place 5 gangers on it and rest of the gang – on lower level.


How To Make Display Base - Tutorial


How To Make Display Base - Tutorial

Time to mark final destination of the miniatures on the display base. To do it I simple pressed bases onto the styro – it will be helpful while cutting holes for the sockets.


How To Make Display Base - Tutorial


How To Make Display Base - Tutorial

Cutting is easy – hot wire deals with styro with ease. All you have to remember about at this stage is cutting holes slightly bigger than bases.

Also don’t throw away cylinders left after cutting the thing – these will be useful a bit later.


Photo: How To Make Display Base - Tutorial

It’s time to prepare styro-plugs for the work ahead. I simply cut them in 2 slim parts – don’t have to be very precise at this step, these parts will be just a filler.


How To Make Display Base - Tutorial


How To Make Display Base - Tutorial

Making sockets for miniatures

The plan is to fill holes in the base with sockets and prepared styrofoam for better bond.


Photo: How To Make Display Base - Tutorial

The socket was made of citadel paint pot lid: if you use these paints it’s good idea to collect the lids – inner part is just PERFECT for 25mm round bases*. I still have some pots from Citadel range but because I mostly use Vallejo brand I made a single socket and recasted it for
the whole Necromunda gang.


Photo: How To Make Display Base - Tutorial

The procedure is simple:
Put the styrofoam on the back and place sockes in the holes (I told ya to make the holes slightly bigger, didn’t I? 😉 ).


Photo: How To Make Display Base - Tutorial

Hit the sockets with some glue – once again polymer (it’s really fine but it requires some time to try) and then cover it with
slim styro plugs.


How To Make Display Base - Tutorial


How To Make Display Base - Tutorial

Texturing the surface

Now we’ll fill the gaps and give the base better surface to glue the sand bit later.

I took some plaster and mixed it with water until if got consistency of yoghurt (more less)


Photo: How To Make Display Base - Tutorial

At first I was trying to apply it on the base with knife or some spatula but after 5 seconds I realised fingers are much better for this job.
Remember I wrote there will be wife / gf / bro required? That’s it!!! That’s the stage!!!! I couldn’t play with plaster and take pictures
without making the camera really dirty (and probably – ruined if the wet plaster hit the lens)


Photo: How To Make Display Base - Tutorial

The dirty job is dome – give it some time to dry. I applied pretty thin layer so after having a coffee (right side of the pic) and taking dog for a walk (~30 mins alltogether) I could continue the work.


Photo: How To Make Display Base - Tutorial

Bases of all Agent Orange members are really simple: small gravel + sand painted with washes and then drybrushed. I think
simplicity is ALWAYS the key especially in case of gaming models. Therefore making group base was no problem at all.
I prepared some fine sand and some gravel.


Photo: How To Make Display Base - Tutorial

Repeat the procedure on whole base just remember – work on small area at once because diluted glue can sink into plaster if you give it some time.

When you got it done – leave the base to dry completely. And I mean it – be sure it’s totally dry before the next step which is removing excess of sand with large, soft brush.


Photo: How To Make Display Base - Tutorial

Now we have to make sure sand and gravel won’t fall off during painting

Great way to ensure that is painting whole base with heavily diluted pva glue – some gravel will fall off now but not when you will be drybrushing the base. After pva dried I painted base once again – you can never be sure enough… 😉


Photo: How To Make Display Base - Tutorial

Once again it’s time for waiting game before some paint can be slapped. Of course thank to the modern cosmic technology we can
shorten waiting.


How To Make Display Base - Tutorial


How To Make Display Base - Tutorial

Painting the display base

I tried to paint the thing more less the same as bases of all gangers. So first I mixed devlan mud wash, a bit of smoke and lots of water. Diluted paint dries up a while but it is easier to control: you can add another layer whenever you think the base should be darker.


Photo: How To Make Display Base - Tutorial

After that I added some deeper shadows using dark olive – once again heavily diluted. I chose this color because I also used it to
paint bases rims of my gangers – this trick should unify models with the big base.


Photo: How To Make Display Base - Tutorial

Wait patiently until the wash dries – the next step is drybrushing:
I started with bleached bone and then applied highlights – skull white. Both colors were used to paint bases of the gangers.


Photo: How To Make Display Base - Tutorial

The base is ok but I want it dirty – I powdered some chalk (dark olive color) and applied it on the base. Chalk was sealed with
matt spray but turpentine also works fine for this (I wrote about it in Gorkamorka Ork base text). Besides it’s MUCH cheaper than ready to use dry
pigments.


Photo: How To Make Display Base - Tutorial

The last thing was painting the sockets. My first color choice was black but all in all I decided to use olive. I mixed some matt
varnish with paint to protect the paint – minis will be put on the base after every game.


Photo: How To Make Display Base - Tutorial

Done!

And here are pictures of the final thing taken in the photo tent: I know black background isn’t the best idea but black t-
shirt was the only think big enough to use as background – base is pretty large after all…


Photo: How To Make Display Base - Tutorial


Photo: How To Make Display Base - Tutorial

Once again I hope you found my article useful and once again I hope to update the site shortly.
Cheers!
Demi

* Please note: using pot lid as base socket wasn’t my idea – I spotted it on Jakob Rune Nielsen’s** page
** Who is actually one of my fav painters in the miniatures hobby

Brown armour for Imperial Guard – Demi_morgana’s method

Greetings!Some time ago I decided to paint my Imperial Guardsmen in an original way. I chose to go with desert colors and brown armour, which were inspired by Polish soliders fighting evil terrorists in Iraq 😉 And I thought why shouldn’t I make a miniature painting tutorial about it…

Several persons asked me how I painted this kind of armour, so here it is:

Painting brown armour in 8 steps

[list class=bullet-2]

  • chaos black undercoat
  • several watered down layers of bestial brown
  • edges were highlighted with bestial brown + snakebite leather mix
  • next I added more and more skull white to the mix and used it for further highlighting (I put about 4-5 layers)
  • when you think it looks OK, put watered down flesh wash or brown ink and wait until it’s TOTALLY dry
  • after that put some thin skull white lines in the very edges so it looks like reflecting light
  • if bestial brown followed by the wash is too dark in your opinion, highlight it using thin layer of pure bestial brown
  • seal it with matt varnish and that’s all 😉

 

The effect can look like this:

Brown armour painting tutorial - results

I hope this tutorial was useful for you.Have fun painting!