Painting first 3D Bases – a step-by-step description

I painted first of recently reviewed 3D Bases Modular Terrain. So far I managed to paint two bases – Stone Slabs and Transition C/R.
3D Bases
(click to see bigger photo)

These are fairy simple bases (flat ones), so this is why I started with them 🙂 Here are the steps that led me to final effect.

Stone Slabs
After cutting off some excess material on the edges of the base (I wanted the edges to be as straight as possible, so there will be no spaces between individual bases) I washed the base in hot water brushing it with soap. I wanted to remove the agents from casting process that could make the paint stick worse than it should. Then I airbrushed the base with Vallejo poliurethane primer – in this case German Panzer Grey as I have large 200 ml bottle of it. I hope the primer will be as tough as German Panzer tank 🙂 Here is how it looks now:
3D Bases Stone Slabs WIP

As you can see not much has changed. Next day (when the primer dried) I airbrushed the whole base in beige color. Then spraying with lower pressure (and more diluted paint) I colored random slabs in different colors (browns, greys, reds, etc) by adding various colors to the mix. I tried to be as precise as possible (as my rather poor airbrush skills allowed me to). Now the base is much more colorful:
3D Bases Stone Slabs WIP

Then I drybrushed the base (using the biggest brush I had, which was round flat 5) with base (beige) color with addition of some white and yellow:
3D Bases Stone Slabs WIP

The base looks better now but is missing some shadows. To correct this I appled Vallejo wash Black Shade (the one in huge 200 ml pot) mixed with a drop of Vallejo clear red to make it more brown than black. I thinned it with distilled water as I did not want the wash to be too sharp. The common drybrush and wash made the various color slabs to harmonize with each other. After that I sprayed the whole base with Maimeri Matte Varnish in spray can – the same I use on my miniatures. The goal was to protect the paintjob and to eliminate any shine from the base. Now the base is finished:
3D Bases Stone Slabs WIP

Transition C/R
The steps on this base are quite similar to those on Stone Slabs one. After washing the base I applied random spots of white glue and sprinkled static grass on it. I chose spots with bare ground, not where the stone slabs were. When the glue dried I removed excess of static grass with a brush and primed the base just like Stone Slabs one. The next day I airbrushed the whole base with shades of brown, and then focusing on details I sprayed stone slabs with shades of grey (and purple, blue, brown,…) and grass with green:
3D Bases Transition C/R WIP

Then I started drybrushing with lighter shades of coresponding colors – ground with light yellow, slabs with light grey and grass with light green:
3D Bases Transition C/R WIP

Now it’s time to build shadows. Again – by applying dark brown wash. I used wash only on slabs, as I did not want the ground to be darker than it already was. After it dried I sprayed the base with matte varnish. The base is ready:
3D Bases Transition C/R WIP

This is the way I painted my 3D Bases. Perhaps it is not the best or the only way to paint them, but I wanted to have them them finished decently in relatively short time. Painting each base (all the steps) took me about 1 hour, not counting cleaning the airbrush 🙂

Let’s see how the bases look with miniatures. I can create many epic scenes, like:

– demonic encounter in dungeon
3D Bases with figures
A group of adventures wanted to lay their hands on tempting demonettes when out of a sudden a large and sinister demon appeared spoiling everything.

– maybe some undead this time?
3D Bases with figures
A couple of brave warriors exploring the dungeon were surrounded by horde of undead (much less tempting than those demonettes!)

– Viking raid!
3D Bases with figures
Vikings rarely assault toilets, but I don’t have any more serious buildings finished yet, so it must be enough for now.

– Confrontation!
3D Bases with figures
For those of you who prefer oldie but goodie Rackham Confrontation – no problem. Wolfen pack led by famous Killyox faces vicious drune horde.

Those bases look much more realistic than flat playmats. And the two bases I painted are the simplest ones. I cannot imagine how cool more elaborate bases like Broken Column or Abbey would look painted! I will find it out as soon as I find time to paint them 🙂

The bad, the worse and the space monkey

It’s time to introduce myself – and for an artist there is no better way to say “hello” than presenting a bunch of painted miniatures. For starters, I want to show you a small commision I did for a certain gamer. I was asked to paint 3 miniatures from Corvus Belli’s Infinity the Game range. My client’s faction is Combined Army, the most dangerous and terrifyng forces in the whole Infinity universe (seriously, don’t mess with these guys!).

Just look at them: strange, big guy with heavy armour and a very big gun instead of his arm, sneaky little alien with cosmic gun and (last but not least) evil monkey with (again) a suit of heavy armour and (guess what?) … a big gun!

How cool is that? 🙂

I think these three little fellows presents the variety of Combined Army creatures. Just add a very pleasant colour scheme chosen by the client and here’s the result: The Bad, The Worse and The Space Monkey 🙂
My goal was to make this miniatures a really fine addition to my client’s army. If you like it, you can check other great painted miniatures in my gallery.
Enjoy!